VoiceCom 1.6

A voice communication program for your PC The VoiceCom application was developed to be a voice communication program for your PC. VoiceCom is designed for voice communication between PC VoiceCom applications (terminals) on local LAN. VoiceCom behaves like a “push to talk” intercom. Once several (at least 2) VoiceCom applications on local LAN become aware of each other, the user can push and hold a key or a button corresponding to the desired remote VoiceCom terminal and start talking. The voice is reproduced on the addressed remote VoiceCom terminal. When finished talking the user releases the key or the button. VoiceCom supports communication with up to 6 terminals on local LAN. Each VoiceCom terminal can talk to any of the other VoiceCom terminal (point to point) or to all VoiceCom terminals at once (point to multipoint, broadcast voice announcement). VoiceCom terminals autodetect each others presence on local LAN and display the remote VoiceCom terminal’s names to the user for communication. The only user configurable parameter at the start is the local VoiceCom terminal’s name. This is entered by the user only once on each VoiceCom terminal. Example of VoiceCom use scenario is a software house intercom system between different rooms or areas of the house (Each VoiceCom terminal could be named by the user as for example: “Bedroom”, “Kitchen”, “Office”, “Lounge”, “Garage”. · Push to talk voice communication between up to 6 PCs on the LAN · Address and talk to an individual terminal or talk to all (broadcast) · Auto detect VoiceCom terminals on the LAN Requirements: · Windows compatible PC with microphone and speakers · It is possible to run VoiceCom without microphone (only to receive voice) or without speakers (only to send voice) but not without both · PC must be connected to local network Limitations: · Reminder screen on startup · Evaluation is time limited to 3 days